Last updated on 2025-02-21 03:52:09 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 0.2.0 | 4.01 | 56.78 | 60.79 | OK | |
| r-devel-linux-x86_64-debian-gcc | 0.2.0 | 2.70 | 41.58 | 44.28 | OK | |
| r-devel-linux-x86_64-fedora-clang | 0.2.0 | 97.26 | ERROR | |||
| r-devel-linux-x86_64-fedora-gcc | 0.2.0 | 107.05 | ERROR | |||
| r-devel-macos-arm64 | 0.2.0 | 31.00 | OK | |||
| r-devel-macos-x86_64 | 0.2.0 | 74.00 | OK | |||
| r-devel-windows-x86_64 | 0.2.0 | 6.00 | 77.00 | 83.00 | OK | |
| r-patched-linux-x86_64 | 0.2.0 | 4.62 | 53.72 | 58.34 | OK | |
| r-release-linux-x86_64 | 0.2.0 | 3.68 | 53.05 | 56.73 | OK | |
| r-release-macos-arm64 | 0.2.0 | 44.00 | OK | |||
| r-release-macos-x86_64 | 0.2.0 | 75.00 | OK | |||
| r-release-windows-x86_64 | 0.2.0 | 5.00 | 75.00 | 80.00 | OK | |
| r-oldrel-macos-arm64 | 0.1.0 | 40.00 | OK | |||
| r-oldrel-macos-x86_64 | 0.2.0 | 84.00 | NOTE | |||
| r-oldrel-windows-x86_64 | 0.2.0 | 6.00 | 89.00 | 95.00 | NOTE |
Version: 0.2.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [17s/30s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(cocoon)
>
> test_check("cocoon")
[ FAIL 15 | WARN 0 | SKIP 1 | PASS 274 ]
══ Skipped tests (1) ═══════════════════════════════════════════════════════════
• On CRAN (1): 'test-format_statvalues.R:64:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-format_stats_lmerModLmerTest.R:55:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a") (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = .745"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:56:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", digits = 2) (`actual`) not equal to "_β_ = -0.10, SE = 0.31, _t_ = -0.33, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.10, SE = 0.31, _t_ = -0.34, _p_ = .745"
`expected`: "_β_ = -0.10, SE = 0.31, _t_ = -0.33, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:57:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", pdigits = 2) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .75" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = .74"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .75"
── Failure ('test-format_stats_lmerModLmerTest.R:58:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", pzero = TRUE) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = 0.748" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = 0.745"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = 0.748"
── Failure ('test-format_stats_lmerModLmerTest.R:59:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", full = FALSE) (`actual`) not equal to "_β_ = -0.103, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.104, _p_ = .745"
`expected`: "_β_ = -0.103, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:60:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", italics = FALSE) (`actual`) not equal to "β = -0.103, SE = 0.310, t = -0.333, p = .748" (`expected`).
`actual`: "β = -0.104, SE = 0.310, t = -0.337, p = .745"
`expected`: "β = -0.103, SE = 0.310, t = -0.333, p = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:61:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", type = "latex") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333, $p$ = .748" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337, $p$ = .745"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333, $p$ = .748"
── Failure ('test-format_stats_merMod.R:59:3'): formatting lm linear models works properly ──
format_stats(test_lmer, term = "a") (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:60:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", digits = 2) (`actual`) not equal to "_β_ = -0.10, SE = 0.31, _t_ = -0.33" (`expected`).
`actual`: "_β_ = -0.10, SE = 0.31, _t_ = -0.34"
`expected`: "_β_ = -0.10, SE = 0.31, _t_ = -0.33"
── Failure ('test-format_stats_merMod.R:61:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", pdigits = 2) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:62:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", pzero = TRUE) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:63:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", full = FALSE) (`actual`) not equal to "_β_ = -0.103" (`expected`).
`actual`: "_β_ = -0.104"
`expected`: "_β_ = -0.103"
── Failure ('test-format_stats_merMod.R:64:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", italics = FALSE) (`actual`) not equal to "β = -0.103, SE = 0.310, t = -0.333" (`expected`).
`actual`: "β = -0.104, SE = 0.310, t = -0.337"
`expected`: "β = -0.103, SE = 0.310, t = -0.333"
── Failure ('test-format_stats_merMod.R:65:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", type = "latex") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333"
── Failure ('test-format_stats_merMod.R:66:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", type = "latex", dfs = "sub") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333"
[ FAIL 15 | WARN 0 | SKIP 1 | PASS 274 ]
Error: Test failures
In addition: Warning messages:
1: In optwrap(optimizer, devfun, getStart(start, rho$pp), lower = rho$lower, :
convergence code -2 from nloptwrap: NLOPT_INVALID_ARGS: Invalid arguments (e.g. lower bounds are bigger than upper bounds, an unknown algorithm was specified, etcetera).
2: In checkConv(attr(opt, "derivs"), opt$par, ctrl = control$checkConv, :
Model failed to converge with max|grad| = 0.350361 (tol = 0.002, component 1)
3: In optwrap(optimizer, devfun, getStart(start, rho$pp), lower = rho$lower, :
convergence code -2 from nloptwrap: NLOPT_INVALID_ARGS: Invalid arguments (e.g. lower bounds are bigger than upper bounds, an unknown algorithm was specified, etcetera).
4: In checkConv(attr(opt, "derivs"), opt$par, ctrl = control$checkConv, :
Model failed to converge with max|grad| = 0.350361 (tol = 0.002, component 1)
Execution halted
Flavor: r-devel-linux-x86_64-fedora-clang
Version: 0.2.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [16s/26s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(cocoon)
>
> test_check("cocoon")
[ FAIL 15 | WARN 0 | SKIP 1 | PASS 274 ]
══ Skipped tests (1) ═══════════════════════════════════════════════════════════
• On CRAN (1): 'test-format_statvalues.R:64:3'
══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test-format_stats_lmerModLmerTest.R:55:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a") (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = .745"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:56:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", digits = 2) (`actual`) not equal to "_β_ = -0.10, SE = 0.31, _t_ = -0.33, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.10, SE = 0.31, _t_ = -0.34, _p_ = .745"
`expected`: "_β_ = -0.10, SE = 0.31, _t_ = -0.33, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:57:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", pdigits = 2) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .75" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = .74"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = .75"
── Failure ('test-format_stats_lmerModLmerTest.R:58:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", pzero = TRUE) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = 0.748" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337, _p_ = 0.745"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333, _p_ = 0.748"
── Failure ('test-format_stats_lmerModLmerTest.R:59:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", full = FALSE) (`actual`) not equal to "_β_ = -0.103, _p_ = .748" (`expected`).
`actual`: "_β_ = -0.104, _p_ = .745"
`expected`: "_β_ = -0.103, _p_ = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:60:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", italics = FALSE) (`actual`) not equal to "β = -0.103, SE = 0.310, t = -0.333, p = .748" (`expected`).
`actual`: "β = -0.104, SE = 0.310, t = -0.337, p = .745"
`expected`: "β = -0.103, SE = 0.310, t = -0.333, p = .748"
── Failure ('test-format_stats_lmerModLmerTest.R:61:3'): formatting lm linear models works properly ──
format_stats(test_lmer2, "a", type = "latex") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333, $p$ = .748" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337, $p$ = .745"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333, $p$ = .748"
── Failure ('test-format_stats_merMod.R:59:3'): formatting lm linear models works properly ──
format_stats(test_lmer, term = "a") (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:60:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", digits = 2) (`actual`) not equal to "_β_ = -0.10, SE = 0.31, _t_ = -0.33" (`expected`).
`actual`: "_β_ = -0.10, SE = 0.31, _t_ = -0.34"
`expected`: "_β_ = -0.10, SE = 0.31, _t_ = -0.33"
── Failure ('test-format_stats_merMod.R:61:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", pdigits = 2) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:62:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", pzero = TRUE) (`actual`) not equal to "_β_ = -0.103, SE = 0.310, _t_ = -0.333" (`expected`).
`actual`: "_β_ = -0.104, SE = 0.310, _t_ = -0.337"
`expected`: "_β_ = -0.103, SE = 0.310, _t_ = -0.333"
── Failure ('test-format_stats_merMod.R:63:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", full = FALSE) (`actual`) not equal to "_β_ = -0.103" (`expected`).
`actual`: "_β_ = -0.104"
`expected`: "_β_ = -0.103"
── Failure ('test-format_stats_merMod.R:64:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", italics = FALSE) (`actual`) not equal to "β = -0.103, SE = 0.310, t = -0.333" (`expected`).
`actual`: "β = -0.104, SE = 0.310, t = -0.337"
`expected`: "β = -0.103, SE = 0.310, t = -0.333"
── Failure ('test-format_stats_merMod.R:65:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", type = "latex") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333"
── Failure ('test-format_stats_merMod.R:66:3'): formatting lm linear models works properly ──
format_stats(test_lmer, "a", type = "latex", dfs = "sub") (`actual`) not equal to "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333" (`expected`).
`actual`: "$\\beta$ = -0.104, SE = 0.310, $t$ = -0.337"
`expected`: "$\\beta$ = -0.103, SE = 0.310, $t$ = -0.333"
[ FAIL 15 | WARN 0 | SKIP 1 | PASS 274 ]
Error: Test failures
In addition: Warning messages:
1: In optwrap(optimizer, devfun, getStart(start, rho$pp), lower = rho$lower, :
convergence code -2 from nloptwrap: NLOPT_INVALID_ARGS: Invalid arguments (e.g. lower bounds are bigger than upper bounds, an unknown algorithm was specified, etcetera).
2: In checkConv(attr(opt, "derivs"), opt$par, ctrl = control$checkConv, :
Model failed to converge with max|grad| = 0.350361 (tol = 0.002, component 1)
3: In optwrap(optimizer, devfun, getStart(start, rho$pp), lower = rho$lower, :
convergence code -2 from nloptwrap: NLOPT_INVALID_ARGS: Invalid arguments (e.g. lower bounds are bigger than upper bounds, an unknown algorithm was specified, etcetera).
4: In checkConv(attr(opt, "derivs"), opt$par, ctrl = control$checkConv, :
Model failed to converge with max|grad| = 0.350361 (tol = 0.002, component 1)
Execution halted
Flavor: r-devel-linux-x86_64-fedora-gcc
Version: 0.2.0
Check: R code for possible problems
Result: NOTE
.stop_not_number: no visible global function definition for ‘%||%’
Undefined global functions or variables:
%||%
Flavors: r-oldrel-macos-x86_64, r-oldrel-windows-x86_64